Nastran to Code_Aster: automatic translation

This is a very short post to describe a tool that can be used for automatic translation between Nastran and Code_Aster: the Vega translator.

It is available as a command line program in our Download section, feel free to give it a try!

Its usage is quite straightforward, you simply have to unzip the archive, enter in the vegaw folder and write in a command prompt:

vegapp --solver-version=stable prob6.dat nastran aster

You should specify a full path to the vegapp.exe executable if you are in a different folder and of course you can specify a different file in place of the prob6.dat used in this example (and included in the archive). The converter will (do its best to) translate and create Code_Aster files:

Nastran study converted to Code_Aster input files on Windows

If the translation is completed without errors you will get a fully working Code_Aster study (mesh and command files included), that you can directly run:

Nastran study run using Code_Aster on Windows

The translator comes from an open source project on GitHub and it is still limited, but its capabilities can be extended and we intend to do so (with better support of the Nastran language or even other solvers).

If you are interested in this, please contact us for more information!

8 thoughts on “Nastran to Code_Aster: automatic translation

    1. Hi Sergio,

      Thank you for your interest. This has been designed as an “universal translator”, meaning that we can add input and output formats, including other solvers. Anyone wishing to participate is welcome, of course! We are also looking for sponsors: it would be much quicker if we could work at it more regularly… ^__^

      Best regards

      Like

    1. Hi Massimo,
      Translating back is not possible at the moment and very difficult in the general case: since Aster is based on Python it often contains some programming code that would be very hard to translate into Nastran syntax. One way to solve this would be to “flatten” the Code_Aster output, but it requires a lot of work to do so. I would like to look at, at least, convert output results from med into the op2 format but I cannot really say when it could be done.
      Thank you for asking, all the best,

      Luca

      Like

  1. Hi, so i have some doubts. Whenever you are done with the translation without errors, You just have to run Aster from the files and that´s it? Or do you have to do again the installation of Aster and follow the steps as it is shown in the page but this time it will work on the cmd?

    Like

      1. Hi Luca,
        Whenever i try to start Aster i keep having the same problem. An error appear with code aster diognostic job. Any ideas of what can be the problem?

        C:\Users\miguel velasco\code-aster_v2019_std-win64>cd v2019

        C:\Users\miguel velasco\code-aster_v2019_std-win64\v2019>instalar \ bin \ as_run.bat –test forma01a
        “instalar” no se reconoce como un comando interno o externo,
        programa o archivo por lotes ejecutable.

        C:\Users\miguel velasco\code-aster_v2019_std-win64\v2019>bin\as_run.bat –vers testing –test forma01a

        C:\Users\miguel velasco\code-aster_v2019_std-win64\v2019>echo OFF
        Página de códigos activa: 65001
        starting forma01a

        ——————————————————————————–
        Code_Aster execution

        prepare environment in C:\Users\MIGUEL~1\AppData\Local\Temp\miguel_velasco-LAPTOP-1V53G0P9-interactif_3017

        ——————————————————————————–
        Copying datas

        copying …\tests\forma01a.comm… copying …\tests\forma01a.datg… copying …\tests\forma01a.mmed… Parameters : memory 506 MB – time limit 60 s

        ——————————————————————————–
        Code_Aster run

        Command line 1 :
        C:\Users\miguel” “” “velasco\code-aster_v2019_std-win64\v2019\14.4\bin\aster C:\Users\miguel” “” “velasco\code-aster_v2019_std-win64\v2019\14.4\lib\aster\Execution\E_SUPERV.py -commandes fort.1 –num_job=3017 –mode=interactif –rep_outils=C:\Users\miguel” “” “velasco\code-aster_v2019_std-win64\v2019\outils –rep_mat=C:\Users\miguel” “” “velasco\code-aster_v2019_std-win64\v2019\14.4\share\aster\materiau –rep_dex=C:\Users\miguel” “” “velasco\code-aster_v2019_std-win64\v2019\14.4\share\aster\datg –numthreads=1 –suivi_batch –memjeveux=63.25 –tpmax=60.0
        C:\Users\miguel velasco\code-aster_v2019_std-win64\v2019\14.4\bin\aster: can’t open file ‘C:\Users\miguel “‘: [Errno 22] Invalid argument
        EXECUTION_CODE_ASTER_EXIT_3017=0
        Code_Aster run ended, diagnostic : _ABNORMAL_ABORT

        ——————————————————————————–
        Copying results

        _ABNORMAL_ABORT Code_Aster run ended

        ———————————————————————————
        cpu system cpu+sys elapsed
        ———————————————————————————
        Preparation of environment 0.00 0.00 0.00 0.00
        Copying datas 0.02 0.00 0.02 0.10
        Code_Aster run 0.00 0.00 0.00 0.19
        Copying results 0.00 0.00 0.00 0.00
        ———————————————————————————
        Total 0.06 0.02 0.08 0.49
        ———————————————————————————

        as_run 2018.1

        ————————————————————
        — DIAGNOSTIC JOB : _ABNORMAL_ABORT
        ————————————————————

        EXIT_CODE=4
        El nombre del directorio no es válido.

        C:\Users\miguel velasco\code-aster_v2019_std-win64\v2019>install\13.3\share\aster\profile.bat
        El sistema no puede encontrar la ruta especificada.

        Like

Leave a Reply to Miguel Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s