This post shows how to install the salome-platform package on Windows. The same method can be applied to install Salome-Meca for Windows package available in our download page. For Code_Aster Windows standalone package installation, follow this post.
Install Salome for windows
Download Salome for windows from the official salome-platform download page.
Execute the downloaded file. It will self-extract in a SALOME-x.y.z-WIN64 directory.
Test your Salome installation
Go into the extracted directory and into the “WORK” directory. Then execute “run_salome.bat”.
A cmd window will appear and set up things since Salome is running for the first time, be patient … Then another cmd window will effectively launch Salome.
Finally a graphical environment should appear 🙂
Hallo I have a problem with installation of salome-Meca, Can You help me. Describe: ok than I rrunning a run_salome.bat after that I see a progress in comand window a at the moment start a new small window with informations about the problem with VCOMP100.dll (didnt found a object VCOMP100.dll) than i push a OK button and process in comand window is still lauching (++++++++ like that). Two line and in the and I have a informations: “Error during Salome launch” Do You have some advices ? Sorry but I’m a engineer not a programist. It is my first step with Salome and Code_aster.
LikeLike
You need to install the Visual C++ 2010 redistributable library: https://www.microsoft.com/en-US/download/details.aspx?id=13523
LikeLike
I have the same problem, an I’ve already intalled Visual C++ 2013. But in the end i have this message “Error during Salome launch”.
LikeLike
Hello Davivi,
You may try with Visual C++ 2015
LikeLike
Hi,
I love open source programs, therefore thank you for your work. I am very eager to use code_aster and Salome-Meca, I followed the tutorial, installed Microsoft Visual C++ 2010 SP1 Redistributable Package (x64) and Microsoft Visual C++ 2008 SP1 Redistributable Package (x64), extracted files. However when I run run_salome.bat, the Salome-Meca started to load when it gets to 100 % I got an error:
C++ container is not found.
I just can not come around that, please help.
LikeLike
Hello,
There are some known issues and workarounds in the FAQ? I suggest you to read it and come back here if the problem persist
LikeLike
Dear mr. Maximilien,
thank you a lot. Just when I was writing a response, saying that I have check all the FAQ; no special signs ect., I remembered that while there were none in path I had one in computer name. I changed computer name, and magic happened, Salome is running =)
Thank you again.
LikeLike
Thanks, I updated the FAQ : this information may help other users
LikeLike
Hello I have installed salome meca 2018 64bit on my PC (that runs windows 8.1) as indicated in the instructions above, but I have the following problems:
1)First of all, I’m not able to save a project. When I try to save a project there is a warning that I quote here: “Can’t save file “blabla” possible reasons:
-permission denied
-Unsufficient disk space
-application error try to use another file name
2)Second, when I try to launch the program often SALOME MECA freeze/lock itself when I chose “Geometry” in the menu” and so I have to close the programs.
3)Third, I’m not able to import iges files of bidimensional lines (straight and curved lines). A warning says that there is an error without specify what this error is. I don’t understand. This iges file in Ansys works properly.
I have the same problems with salome meca 2017 64bit
Can anyone help me?, I’m a civil engineer not a programmer. Thank you very much.
LikeLike
Hello,
Thanks for your feedback. I think solutions for problems 1 and 2 are in the FAQ. Please come back if problems persist
LikeLike
Hi,
I installed the version 2018 of salome-meca on a windows 7 Workstation.
I’m tryng to run one of the tutorial in
[[https://code-aster-windows.com/2017/10/28/salome-meca-2017-asterstudy-module/#comment-118][here]]
I got this warning when I select the asterstudy module
Is this an issue?
LikeLike
Hi
when I try t o apply mechanical loads I got the following error:
TYPE: AttributeError
Value: object has no attribute
LikeLike
No
LikeLike
Hi,
while I install run_salome.bat I got the following error:
I tried Salome 8.2.0 binary and Salome-meca 2019 Win10 x64. both of them giving same error. Can anyone know the solution?
(vc++ 2010-2019 installed)
runSalome running on DESKTOP-04DPI8U
Searching for a free port for naming service: 2820 – OK
Searching Naming Service ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Failed to narrow the root naming context
Traceback (most recent call last):
File “C:\SALOME-9.5.0\W64\KERNEL\bin\salome\runSalome.py”, line 680, in useSalome
clt = startSalome(args, modules_list, modules_root_dir)
File “C:\SALOME-9.5.0\W64\KERNEL\bin\salome\runSalome.py”, line 476, in startSalome
clt=orbmodule.client(args)
File “C:\SALOME-9.5.0\W64\KERNEL\bin\salome\orbmodule.py”, line 56, in __init__
self.initNS(args or {})
File “C:\SALOME-9.5.0\W64\KERNEL\bin\salome\orbmodule.py”, line 95, in initNS
sys.exit(1)
SystemExit: 1
— Error during Salome launch —
LikeLike
Hi, i´m trying to download salome-meca on my windows and i´m having some problems. This is what i get on the command window:
runSalome running on LAPTOP-1V53G0P9
Searching for a free port for naming service: 2819 – OK
Searching Naming Service found in 0.0 seconds
Traceback (most recent call last):
File “C:\aster\MODULES\INSTALL\KERNEL\RELEASE\KERNEL_INSTALL\bin\salome\runSalome.py”, line 633, in useSalome
clt = startSalome(args, modules_list, modules_root_dir)
File “C:\aster\MODULES\INSTALL\KERNEL\RELEASE\KERNEL_INSTALL\bin\salome\runSalome.py”, line 477, in startSalome
mySessionServ.run()
File “C:\aster\MODULES\INSTALL\KERNEL\RELEASE\KERNEL_INSTALL\bin\salome\server.py”, line 76, in run
pid = subprocess.Popen(command).pid
File “C:\aster\PRODUCTS\python-3.6.0\Lib\subprocess.py”, line 707, in __init__
restore_signals, start_new_session)
File “C:\aster\PRODUCTS\python-3.6.0\Lib\subprocess.py”, line 990, in _execute_child
startupinfo)
FileNotFoundError: [WinError 2] El sistema no puede encontrar el archivo especificado
— Error during Salome launch —
Does anyone know what could be the problem?
LikeLike
Hello, I have an error message when I run salome_meca, it is not the same as the previously posted ones:
Warning, no type found for resource “localhost”, using default value “single_machine”
Searching /Kernel/Session in Naming Service +++++++ found in 3.5 seconds
Start SALOME, elapsed time : 0.0 seconds
This application failed to start because it could not find or load the Qt platform plugin “windows”
in “”.
Reinstalling the application may fix this problem.
It seems that there is an issue in the path to find the proper DLLs (if I understood it right from other forums). How could I solve this ?
Thanks for your advice,
Best
LikeLike
Hello Yoram,
You can ignore “Warning, no type found for resource “localhost”, using default value “single_machine”” and “This application failed to start because it could not find or load the Qt platform plugin “windows” in “”.”
If salome doesn’t start, there is undoubtedly an other issue
Regards
LikeLike
Hello,
I have problems with the installation.
I first install code aster then launch “run_salome.bat” but nothing, the Onedrive folder opens.
LikeLike